KTC series Click number：456

Download PDF
Features ：
A、Super service life    ( 100 million cycles)
B、Linearity  0.05% ( Stroke≥350mm)
C、Repeatability <0.01mm
D、Operating speed ≤10m/s
E、Protection class IP65
F、DIN 430650    connector
    KTC Pull Pole series linear position sensors are designed for precise measurement of displacement and length. The Measuring range of KTC is up to 1250mm with repeatability of ±0.01mm and linearity of 0.05% (model size>350mm).Its structure is designed for simple installation and reliable work. Anodized aluminium housing can contribute to nice appearance and super corrosion resistance. By adopting conductive plastic track inside ,the product could run smoothly and have low-noise output signals. There is a ball coupling at the top of pull pole to offset the effects of misalignment with the actuating part. Credited to the technology of trimming resistance, MINOR could not only provide you with required linearity, but also any resistance you need, such as 5678Ω or 8765Ω.
 
Technical specification of KTC
Model Unit  75 100 125 150 175 200 225 250 275 300 325 350 375 400 425
Measuring range  mm 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425
Total electrical travel(T.E) mm 80 105 130 155 180 205 230 255 280 305 330 355 380 405 430
Resistence KΩ  5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
Resistence tolerance ±% 20
linearity % 0.1 0.1 0.09 0.08 0.08 0.08 0.08 0.07 0.07 0.06 0.06 0.05 0.05 0.05 0.05
Repeatability mm 0.01
Recommended  current(wiper) μA 1
Max current(wiper) mA 10
Max voltage V 42
Output range 　 0-5V,0-10V,4-20mA
Resolution 　 infinite
Output smoothness % 0.1
Insulation resistance MΩ  ≥10
Temperature Coefficient ppm/k 5
Dimensions A mm 152 177 202 227 252 277 302 327 352 377 402 427 452 477 502
Mechanical travel(M.T) B mm 82 117 142 167 192 217 242 267 292 317 342 367 392 417 442
Operating force N ≤3
Operating temperature ℃ -60······150
Vibration frequency range Hz 5······2000
Amplitude mm 0.8
Acceleration g 20
Service life cycle 100×106
Operating speed m/s ≤10
Model Unit  450 475 500 550 600 650 700 750 800 850 900 950 1000 1150 1250
Measuring range  mm 450 475 500 550 600 650 700 750 800 850 900 950 1000 1150 1250
Total electrical travel(T.E) mm 455 480 505 555 605 655 705 755 805 855 330 955 1005 1155 1255
Resistence KΩ  5 5 5 5 10 10 10 10 10 10 10 10 10 10 10
Resistence tolerance ±% 20
linearity % 0.05 0.05 0.05 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.03 0.03
Repeatability mm 0.01
Recommended  current(wiper) μA 1
Max current(wiper) mA 10
Max voltage V 42
Output range 　 0-5V,0-10V,4-20mA
Resolution 　 infinite
Output smoothness % 0.1
Insulation resistance MΩ  ≥10
Temperature Coefficient ppm/k 5
Dimensions A mm 527 552 577 627 677 727 777 827 877 927 977 1027 1077 1227 1327
Mechanical travel(M.T) B mm 457 492 517 567 617 667 717 767 817 867 917 967 1017 1167 1267
Operating force N ≤3
Operating temperature ℃ -60······150
Vibration frequency range Hz 5······2000
Amplitude mm 0.8
Acceleration g 20
Service life cycle 100×106
Operating speed m/s ≤10
Notice:
     The data listed in the datasheet is the test result under the condition of temperature 25℃，humidity 52% and the transducers used as voltage dividers with a maximum current of 1μA in the wiper.
　 　
　		 　


Copyright ©2009 www.minor-tech.com all rights reserved   admin   Power by xingkong