KTF slide series linear position sensors are designed for precise measurement of displacement and length . The Measuring range of KTF is up to 2500mm with repeatability of ±0.01mm and linearity of 0.05% (model size>350mm).The structure of side slide drive is delicately designed to make a compact size. Anodized aluminium housing can contribute to nice appearance and super corrosion resistance. By adopting conductive plastic track inside, the product could run smoothly and have low-noise output singals.

    The slider has a ball coupling that used to offset the effects of misalignment with the actuating part. Credited to the technology of trimming resistance, MINOR could not only provide you with required linearity, but also any resistance you need, such as 5678Ω or 8765Ω.

Technical specification of KTF
Model	Unit	75	100	125	150	175	200	225	250	275	300	350	400	450	475	500
Measuring range	mm	75	100	125	150	175	200	225	250	275	300	350	400	450	475	500
Total electrical travel(T.E)	mm	80	105	130	155	180	205	230	255	280	305	355	405	455	480	505
Resistence	KΩ	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5
Resistence tolerance	±%	20
linearity	%	0.1	0.1	0.09	0.08	0.08	0.08	0.08	0.07	0.07	0.06	0.05	0.05	0.05	0.05	0.05
Repeatability	mm	0.01
Recommended  current(wiper)	μA	1
Max current(wiper)	mA	10
Max voltage	V	42
Output range		0-5V,0-10V,4-20mA
Resolution		infinite
Output smoothness	%	0.1
Insulation resistance	MΩ	≥10
Temperature Coefficient	ppm/k	5
Overall Length	mm	224	249	274	299	324	349	374	399	424	449	499	549	599	624	649
Mechanical travel(M.T) B	mm	82	107	132	157	182	207	232	257	282	307	357	407	457	482	507
Operating force	N	≤3
Operating temperature	℃	-60······150
Vibration frequency range	Hz	5······2000
Amplitude	mm	0.8
Acceleration	g	20
Service life	cycle	100×106
Operating speed	m/s	≤10
Model	Unit	550	600	650	700	750	800	850	900	950	1000	1150	1250	1500	2000	2300
Measuring range	mm	550	600	650	700	750	800	850	900	950	1000	1150	1250	1500	2000	2300
Total electrical travel(T.E)	mm	555	605	655	705	755	805	855	905	955	1005	1155	1255	1505	2005	2305
Resistence	KΩ	5	10	10	10	10	10	10	10	10	10	10	10	20	20	20
Resistence tolerance	±%	20
linearity	%	0.05	0.05	0.05	0.04	0.04	0.04	0.04	0.04	0.04	0.04	0.04	0.03	0.03	0.02	0.02
Repeatability	mm	0.01
Recommended  current(wiper)	μA	1
Max current(wiper)	mA	10
Max voltage	V	42
Output range		0-5V,0-10V,4-20mA
Resolution		infinite
Output smoothness	%	0.1
Insulation resistance	MΩ	≥10
Temperature Coefficient	ppm/k	5
Overall Length	mm	699	749	799	849	899	949	999	1049	1099	1149	1299	1399	1649	2149	2449
Mechanical travel(M.T) B	mm	557	607	657	707	757	807	857	907	957	1007	1157	1257	1507	2007	2307
Operating force	N	≤3
Operating temperature	℃	-60······150
Vibration frequency range	Hz	5······2000
Amplitude	mm	0.8
Acceleration	g	20
Service life	cycle	100×106
Operating speed	m/s	≤10

Notice:

    The data listed in the datasheet is the test result under the condition of temperature 25℃，humidity 52% and the transducers used as voltage dividers with a maximum current of 1μA in the wiper.